Question !?!?
i have a question about the "2m E-Messgerät" that has to be place on the top of the bridge,
On some of the models of the emden i see it placed but,there are also a lot of models without.
The model of Herr Huff is also equipped with one on the bridge, but the drawings of Herr Huff does not show a 2m E-Messgerät.
So Anybody
Gruß
Martin.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
... Yes, that`s a mystery for me too - may be it was "sensitive" equipment and therefore easy to dismantle, e.g. under heavy weather conditions? But anyway, my impression is that it usually can`t be spotted on early prewar-pics, see e.g. http://wwitoday.com/wwiScTechnologyDetail.php?id=29 (good to enlarge!). Same applies for Dresden. So I'll probably drop it when it comes to my model in those 1910 overseas colours.
Auf den besten,halbwegs scharfen Originalfotos,sehe ich nichts von einem E-Messer.
Selbst wenn es einen gab würde man ihn sehen,weil er die Reling/ Persenning überragen muß um überhaupt damit messen zu können.
Das Personal auf der Brücke ist ja auch sichtbar.Relinghöhe ~ 120 cm.
Also did not see it on the orginal foto's,
For me the model of the Emden of herr Huff is a example, i assume his drawings (where it is not placed ) have to correspondence with his model (where it is placed) so that makes it a bit of a mystery for me.
Anyway i will not place it.
What i discovered till so far that there are a lot of differences in the models displayed on the internet, in color and additional parts placed on the model , comparing the models of Herr Huff, Schulze / Zinnecker, and the Russian one.
So i think that i have to find my way there in between. looking to the orginal black and weis pictures of the Emden and models on the internet.
Did some building between all the searching too made the gratings under the compass and bridge wings, remade the compass did not like the one i had, and made the control units for the searchlights, and made some other small stuff, below the pictures.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Du wirst nie ein Modell finden das dem des Originals 100% gleicht,allein deshalb weil die Originale dauernd umgebaut wurden (siehe die Spieren oberhalb der Eselshäupter der Kaiserin Augusta)
Deshalb baue ich meine Modelle so wie sie mir als logisch erscheinen.
Nach genauerer Betrachtung der Skizzen im Gröner und einigen Fotos glaube ich das E-Messer erst nach der Versenkung der Emden eingebaut wurden.Emden hatte keinen,da bin ich mit ziemlich sicher.
Sie wurde im November 1914 versenkt.
Auf dem Wrack der Desden,die im März 1915 versenkt wurde,ist ein E-Messer ganz deutlich sichtbar.
Some rare pics with a few "hidden details" from a crew member in 1910:
Werbung: www.ebay.de/itm/19-Fotos-s-w-eines-Besat...LQAAOSw-0xYlLHI
First nice detail is the sailcloth/ tarpaulin, surrounding the compass tower on pic No. 9.
Also note that on pic 7 and 12 the lids of the hammocks boxes seem to be painted in white or overseas yellow (!), so obviously the linoleum covering those boxes that is usually chosen for Emden models (including the Huff model) was added at a later date, e.g. when Emden was painted in grey in early 1911. Noted that right on time - after having just finished the linoleum covering on the foredeck of my 1910-Graupner-Emden the linoleum on the hammock boxes would have been the next step ... :-)
Finally the top of the bitt on pic 12 seems to be painted in white. This would be in accordance with the relevant fine arts model: www.fineartmodels.com/Emden.html
SMY,
those pictures contain a lot of good information, price is pretty high, So asked the owner friendly for some digital copy's (pictures) of some details of the Emden for the greater good of our forum / modeling of the Emden, but the person was not willing to help and only wants to sell them all together at once. and does not care if they disappear in a private collection never to be seen again.
But the picture and notgeldschein (also on Ebay) of the Emden where in my league,
So i bought them they will be a nice ad to my collection.
the bridge is more or less done so started with the work on the schornsteine made the kind of balcony (witch did some playing with my patience) , and started working on the steam-pipes that have to be placed on the outside of the schornsteine.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Ich glaube ,alle Rohre an den Schornsteinen waren gelb.
Nur an der Dampfpfeife,dort wo der Dampf heraus kam, war die Farbe schmutzig,noch nicht einmal richtig schwarz
Again confusing, the Huff model shows white color, The Zinnecker model yellow the Fineart model grey, MZ Modellbau (Zinnerker side) white. ??
So what is wisdom in this ?
Please advise ?
Martin
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
... It's probably just educated guess - and "educated" can lead to different solutions sometimes. I think pic 9 linked above showed a colour that seemed to be darker than the normal funnel yellow ...
For my feeling i would say Yelow, I was in the Royal Dutch Navy 1989~1993 and there is was very common to "tjet" as you say in German "Pön" everything grey by the nautical service, the most easy way, therefore i would think they would go for the easy way, do not thing that in that point a lot is changed.
Specially iron ships in tropical area's demand a lot of maintenance. Served in the Caribbean for 1 year, and i saw that the Nautical Service had in that time a day job maintaining the ship in proper condition on the outside.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Kleiner Kreuzer Bremen
Bild entfernt (keine Rechte)
Modell kleiner Kreuzer Arcona,2011 von mir in Ludwigslust fotografiert
Bild entfernt (keine Rechte)
Bild entfernt (keine Rechte)
Das Thema Anstrich haben wir im alten Forum schon mehrfach diskutiert,z.B.wie waren sahen Lüfter aus?
Ich kann dir Fotos von Fürst Bismarck zeigen, auf denen der gleiche Lüfter einmal weiß/gelb gestrichen war und ein anderes mal einen glänzenden Lüfterkopf hatte.
Was würdest du tun wenn du Kommandant eines Schiffs wärst das mit 800 Matrosen an Bord auf dem Weg nach China ist?
Ich würde den Matrosen Werkzeug in die Hand drücken mit dem Auftrag die Lüfterköpfe blank zu polieren
Am nächsten Tag würde ich ihnen Pinsel und Farbe geben damit sie sie wieder streichen.
Mit diesen Arbeiten sind sie beschäftigt und kommen wärend der 3 wöchigen Reise nicht auf dumme Gedanken.
Was ich damit sagen will ist:Baue dein Modell so wie es dir logisch erscheint,lege dich auf nichts fest.
Pläne sind geplant,Praxis ist die Realität,so wie Pläne ausgeführt wurden.Beides muß nicht identisch sein.
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Hallo Boris,
nimm mir bitte nicht übel,wenn ich meine Meinung dazu sage.Mir gefällt das Deck nicht.
Die Bilder sind von der Auflösung her nicht optimal,ich glaube jedoch erkennen zu können das die Planken nicht parallel zur Längsrichtung verlegt sind.
Haben die Planken eine Kalfaterung,ist es schon geschliffen?Welches Holz hast du verwendet,sind lange Planken verlegt oder kurze,Stoß an Stoß?
Ich glaube das dort wo die Deckshäuser stehen kein Unterbau sondern große Löcher vorhanden sind, oder irre ich mich.
Beim Verlegen von Holzdecks schwört jeder Modellbauer auf seine eigene Methode.
Meine Methode kannst du meinen Bauberichten entnehmen.Möglichst lange Planken verlegen damit die Richtung stimmt.Immer wieder entlang der Planken prüfen ob sie eine gerade Linie bilden und ev.Abweichungen mit einer Schleifleiste begradigen.
Dein Modell wird ja ein Standmodell bei dem´s nicht auf´s Gewicht ankommt. 0,8 er oder 0,5 er Sperrholz als Unterbau wäre besser gewesen.
Man kann Decks auch so herstellen
0,8er Sperrholz,Fotokopie,Planken,Kalfaterung billiges Elektrikerklebeband,aufgeklebt mit dickflüssigem Sekundenkleber
Bild entfernt (keine Rechte)
Planken so lang wie möglich machen einen sauberen Eindruck.
Bild entfernt (keine Rechte)
Messingblech,gewachst.Fotokopie, Planken mit dünnflüssigem Sekundenkleber aufgeklebt damit das Papier gut durchtränkt wird. Nachher ist es hart wie ein Brett
Bild entfernt (keine Rechte)
Ich finde:So sollte ein Deck nicht aussehen
Bild entfernt (keine Rechte)
Mach das Deck noch einmal du wirst dich wenn es so bleibt später vor Ärger in den Hintern beissen
kuckstu hier Holzdecks
Fuzzy,
thanks for the respond,
appreciate a honest answer.
Perhaps the pictures are a litle blurry,
The wood i used is "birke" that came with the kid, (not the best quality, but cleaned them the best way posible)
i used a heart line to place the planks, for the length of the planks, i used the 3 but shift system with lengths of 12 cm (12M) length of the deck is around 40 cm (40M)
between the planks i placed black paper.
hope the picture below gives a lite beter impression
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Ja das Bild ist viel besser und das Deck sieht in dieser Perspektive auch viel besser aus.
Schwarzes Papier nehmen andere Modellbauer auch.
Du weißt ja,alles was ein Modellbauer irgendwie verwenden kann, ist O.K.
Hallo,
ich finde die Beplankung ganz ok, aber Fuzzy hat Recht, sie passt nicht zu dem ansonsten
perfekt gebauten Modell.
Das muss besser damit du damit glücklich bist.
Ich hab gelernt das Birne da viel besser ist, wenn du was brauchst können wir dir sicher
weiterhelfen
Beste Wünsche.
Christoph
__________________________________
Seefahrt ist not!
Beiträge: | 725 |
Punkte: | 749 |
Registriert am: | 02.10.2015 |
Genau,sag was du brauchst,wenn du das Angebot annehmen willst.
Wobei einige sagen,das Deck ist so hell ( Birke )weil noch Restsand in der Holzstrucktur/Poren voerhanden ist.Decks wurden mit Ziegelsteinen und feinem Sand geschrubbt.
Bild entfernt (keine Rechte)
Ok !!
you got me down
except the offer, will remake the deck,
(really appreciate this a lot !!!)
let talk this by Pb for details
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Hi, hope you accept the offer and not except ;)
You deserve a perfect model even if it hurts.
Beste Wünsche.
Christoph
__________________________________
Seefahrt ist not!
Beiträge: | 725 |
Punkte: | 749 |
Registriert am: | 02.10.2015 |
Sorry,
Slip of the key board
But I Never have problems to remake something new, I admit it sometimes hurts, but I always look to the end picture, if not i would foul my self.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
After i decided to remake the deck and trow this one away, i was thinking lets give it a onemore try, I can not do much wrong on it anymore, so i scraped with a razor blade and sanded it till my fingertips where bleeding and it became like this ?!?!
Looks to me much better, I think the problem is I use wood glue (water based) I glue the deck together with a small solder iron with a flat head, to work faster, wood glue becoms after heating very stif, like veneering
But it also desolfs the black color from the paper, that gives a kind of grey dirt to the wood.
So after scraping and sanding the top layer of the wood I removed the (dirt).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Cernit omnia Deus vindex
Beiträge: | 734 |
Punkte: | 734 |
Registriert am: | 03.10.2015 |
Tolle Arbeit
Beiträge: | 403 |
Punkte: | 914 |
Registriert am: | 28.02.2017 |
Forum Software © Xobor |